Centrifuge
Servicing

Servicing your centrifuge is simplicity in its self but you still need to take care not to damage this precision piece of equipment.

The other great thing is that they require no replacement parts.

This is meant as a brief description of how to clean your centrifuge not a technical manual.

1. Remove the nut from the top and remove the cover.
   
   
2. Lift the rotor from the shaft and be mindful that there will be some oil in there. Be careful with the rotor as it has bushes on both ends so they don’t get damaged.
   
   
3. Unscrew the rotor nut, remove the rotor cover and deflector.
   
   
4. Once open you should see dirt sticking to the rotor cover. Remove the dirt and clean all parts thoroughly.
   
   
5. Assembly is a reverse of the above instructions, taking care to line up location marks where applicable.
   
   
6. Sit back with a cold beverage and admire your work!